Technical Specifications:
Length: 3" (4.5" Including Fittings)
Width: 4.5"
Height: 8" (including power connections) / 7.25" w/out
Power Requirements: 12-14 Volt DC, 18-54 amps nominal, up to 65 amps for short
bursts.
Plates: 25
Gaskets: 26
Cell Surface Area: 450"
Performance: 2-2.5 @ 36 amps / 4-4.5 LPM at 50 amps
Configuration: -NNNN+NNNN-NNNN+ (2 Full Series of Negative & 2 Positive)
Fittings/Plumbing: 2 X 3/8" NPT Barbed Elbows for 1/2" Hose (Fittings can be
changed as per your own requirements)
MMW
13.8 volts, 36 amps and tuned for maximum production, an experienced HHO user
can expect up to 6.9-7.5 MMW.
13.8 volts, 36 amps for a novice user just learning HHO, but using an
approximate 20% KOH mixture and PWM, the user can expect around 5.75-6.5 MMW |
Price: $185.00
To make a purchase, Click Here
This cell is an 25 plate HHO Dry Cell from our GA series cells using 3" X 6"
plates for optimal performance, with a 5 neutral configuration 13.8 Volt DC. 3
Negative plates, 2 positive plates. In hydrogen production, negative current
produces hydrogen, positive current produces oxygen. In a standard series for HHO,
66% hydrogen and 33.3% oxygen is produces. .
Never use a 4N configured cell for automotive use. 4N is specific for 12 volt
applications, not automotive 13.8 volts. The reason for this is the production
range for HHO is 2.0-2.2 volts across a series of plates. A single decimal point
of just .1 volt will begin to produce steam quickly and it's crucial to not
overheat cells, ie if you ever watch videos and you see vapor coming out of the
hose, that is steam, not HHO. If a 4N configured cell (-NNNN+ / +NNNN-) is
operated at 13.8 volts, that is 2.3 volts across the series, and that is not
ideal.
4N configured cells, for 12 volt precisely is -NNNN+
5N configured cells, for 13.8 volt (automotive use) is -NNNNN+ (We manufacture
this identical cell in 5N as well, See Our Other Listings)
This 16 plate cell is intended as a starter cell for someone on a budget and
wants to give HHO a try, or needs a slim-line style cell do to lack of space, or
even for usage as a jewelers torch.
The end plates are constructed of high tensile strength cpvc, not acrylic or
abs. These end plates will not crack like the clear acrylic will or disintegrate
like ABS from the chemical reaction process. They can withstand the pressure,
will not disintegrate, can be torqued down without breaking. The end plates are
also able to withstand any harsh condition from -50 Fahrenheit to 200+
Fahrenheit. Using this material costs more, but it is well worth it, considering
that using a dry cell with acrylic end plates will last a few months, these will
last for years.
The gaskets are perfectly spaced for maximum efficiency. If gaskets are too
narrow (below 1/8"), dry cells will produce too much heat, but if they are too
thick then a huge loss of production will occur. Finding that point of balance
to ensure long term efficiency and minimal heat generation is critical. All our
cells are engineered to meet those specifications time and time again, without
fail. |
